-
Hi Luantty, im not sure where else to communicate to you. But is it possible to get a STM32F446 + USB3320 config? I've been testing to try with the USB OTG HS but i am unsuccessful. :(
-
Hi,
Two issues I am having:
1. CooCox.org no longer exists. You have to hunt around to find a copy to use.
2. When compiling I get the following errors with no mode pins defined:
compile:
…
M0XZS updated
4 years ago
-
Having a hard time to get stm32f446 usb to work with the library. Tried to adapt the cdcacm example for F429 discovery and by changing OTG_FS_GCCFG &= ~OTG_GCCFG_VBDEN in the usb_f107.c file (to disa…
-
Have attempted getting USB working with present otgfs driver implementation with no success. I have tried with the sample cdcacm example code, as well as custom interrupt driven implementation, and ha…
-
Hallo,
ich bekomme in VSCODE folgende fehlermeldung!
Archiving .pio\build\tronxy_stm32f446\lib6c8\libIWatchdog.a
Compiling .pio\build\tronxy_stm32f446\lib554\Wire\Wire.cpp.o
Archiving .pio\b…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I can not configure the Octupus V1.1 for FSMC displays like ILI9488 driver.
With the STM32F…
-
Can we calculate trigonometric functions using the Remez algorithm? This is faster and more accurate than the table lookup method, and the range of arguments can be [-inf,inf]
Here is an example of…
-
1. Fresh install
Needed a fresh install of VS Code with PlatformIO IDE on a different clean windows laptop, wasn’t working on my normal work machine
2. Marlin.py
Replaced Tronxys Version with Ori…
-
As discussed toward the end of #273, Adapt some Examples 2.x to ARM CM4 Core on STM32F446.
Cc: @jvco98
-
I run win 10, with a Tronxy X5sa pro with the F446 chip. I followed the directions aboutComenting out lines for the IRQ issue, and after I do this"
// void EXTI1_IRQHandler(void)
// {
// HAL_GP…