-
* Platform: Platformio
* Processor: STM32L082
* Upload protocol: stlink
* Uploader: Original ST-Linkv2 (5 wires connected)
- Problem: Not able to connect and upload bin file to stm32 when using …
-
Hi,
I have some interrogations about DevEUI attributions and I hope you will help me clarifaying this point ...
So as I understand this, Murata ABZ doesn't supply a DevEUI (I pretty sure I read …
-
Hello,
how far off are you from https://sourceforge.net/projects/ethernut/ HEAD? Any intention to offer it?
Please note, I will be mostly offline until Sep.1
-
I had reason to grab the master branch to check if some unexpected behaviour was manifesting in later build (I was building against 4.4.5 for an existing project).
I'm not building the sample proje…
-
### Description of defect
Hi.
I'm trying to run my program on Murata Type ABZ (CMWX1ZZABZ-078) which is on my custom board.
I already tested on DISCO-L072CZ-LRWAN1(CMWX1ZZABZ-091).
But It seem…
-
I am using a custom board with STM32L082, which should have 6KB EEPROM. When I use the function EEPROM.length() I get 128.
When I tested the same function on Nucleo L152RE, which should have 16KB …
-
Hi There,
May be off topic, but does this bootloader could be compatible with STM32L082 from Murata CMWX1ZZABZ-078 ? It's so slow updating flash with original bootloader by USB
Thanks
-
- [X] Programmer/board type: Stlink/v2
- [x] Programmer firmware version:
- [X] Operating system: Windows 7
- [X] Stlink tools version and/or git commit hash: v1.3.0
- [X] Stlink commandline tool…
-
According to the STM32L082 documentation on page 28, [STM32L082 datasheet](https://www.st.com/resource/en/datasheet/stm32l082kb.pdf), the STM32L082 has the ability to do capacitive sensing. Is there a…
-
Allow KETCube programming over the same interface as used on the KETCube Terminal.