-
Hi, flash is not supported for STM32L452. I would like to know how to flash it.
belnj updated
2 years ago
-
I see that the following (see below) entry is in the xml file, yet my STM32L452 is "not found in database"...
Does this mean that a different (or more specific) entry needs to be added to the xml f…
-
Hello,
I'm trying to connect my STM32L452 chip to an SD Card for logging purpose but it doesn't seem to work using port assignation delivered by STM32duino.
I tried using STM32Cube libraries and i…
-
Devices that need to be feature gated ([taken from stm](https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-ultra-low-power-mcus/stm32l4-series.html?query…
-
Digital inputs are not an option since no I2S input is exposed, analog audio looks like the best option at this point. The STM32 on the Photon can trigger both its ADCs and DACs from the timer modules…
-
The address of the Vrefintcal is at `0x1fff_75aa..0x1fff_75ab` (16bit value) the issue is that this address is not 32bit word aligned, so it can't be read using the regular embassy pac functions, as i…
esden updated
1 month ago
-
Hello,
when I try to flash a NUCLEO-L452RE board with pyOCD i get a
**STLink error (16): AP wait**
When I compile the same mbed blinky project for an STM32L152 pyOCD flashes a NUCLEO-L152RE Boar…
-
For example, on WB55, pin `PD3` can be `SPI2_SCK` on `AF3` and `SPI2_MISO` on `AF5`.
```
PortD,PD3,,,,SPI2_SCK,,SPI2_MISO,,,,,QUADSPI_BK1_NCS,,,,,EVENTOUT,
```
When we configure a default pin …
jimmo updated
2 years ago
-
Umbrella ticket to track power management related activities.
Aim is to STM32 related tickets/PR, but also cross-architectures tickets that might be relevant to enable power management use cases on S…
-
Hello guys,
Thanks for the amazing work.
I need support for Nucleo STM32L452.
Would that be possible?
Thank you.