-
Build a version of BBN Marine OS for m5stack CoreMP135
CoreMP135 Is arm based computer 4GB RAM and with many interfaces two CAN bus for NMEA 2000,
RS 485 for NMEA 0183,
Uart for pypilot motor co…
-
Hi, i am using stm32mp DK2 kit. I have built their latest ecosystem with Yocto and added chromium for testing. Compilation went just fine.
Weston interface boots up correctly after a start (deskto…
-
https://www.ruanx.net/stm32mp1-init/
移植 TF-A、U-Boot 和 Linux 内核,点亮正点原子的 STM32MP157D 开发板。
-
-
You are using rootfs.squashfs. It is read only. Can I change the rootfs type?
i set
Filesystem images
ext2/3/4 root filesystem
ext2/3/4 variant (ext4) --->
>>> Executing post-image …
-
I have been using PlatformIO for most of my projects for years, I want to request support for STM32 processor (STM32MP157A-DK1)
-
It assumes Google Chrome is installed on MacOS when issuing `v Open Flutter DevTools` from CLI debug interface. Installing Google Chrome resolves the crash.
## Command
```
flutter run -d stm32mp…
-
Hello,
I have tried the BUILD steps. But there is some small errors.
I would like to share with you the correct steps that I do on my PC to build the st-image-otbr, as the following:
(command…
-
Can I suggest that you port Marlin firmware to the new STM32MP1 MPUs which has an integrated MCU?
https://blog.st.com/stm32mp1-mpu-stm32mp157a-ev1-stm32mp157c-dk2/
https://blog.st.com/introducti…
-
I'm working on a custom Yocto image based upon the Distribution Package from ST.
First, I built a working image for STM32MP157C-DK2 evaluation board. Now I need to change the target MPU to STM32MP15…
ghost updated
4 years ago