-
Hi, first of all thank you for posting this library
I'm trying to run in on STM32WB55 Nucleo board.
I have Teros12 sensor and I connect it, data pin to PC1(orange) and +5V (brown wire to 5V pin), …
-
Please add support for STM32WB55 boards. Example board: https://www.tindie.com/products/TleraCorp/firefly-ble-development-board/
Arduino Core already available here: [link](https://github.com/Grump…
-
Hi,
I'm fairly new to platformio (though not to STM32 and mbed development), and I notice that the STM32WB55 board is supported both by mbed OS (https://os.mbed.com/platforms/ST-Nucleo-WB55RG/), and …
-
支持[LLSync](https://github.com/tencentyun/qcloud-iot-explorer-BLE-sdk-embedded),使得STM32WB55可以接入腾讯云物联网开发平台
-
Hello
I am starting a new project, I investigate to find the most adequat Hal crate for the MCU (STM32WB55). I would to start an application that send data via USB on a first time, and send data by …
-
Hello,
I noticed that embassy does not support IPCC or the radio coprocessor on stm32wb55. Is there any plans to add them in the future?
This would be a useful feature for many users who want t…
-
Hi,
I am porting the OPTIGA TrustM and AWS FreeRTOS in stm32wb55.
I also port the pkcs11 for OPTIGA trusm and run the aws_test code with testrunnerFULL_PKCS11_ENABLED config set to 1 and it passes…
-
Hi all,
I have got problem during debug nucleo with STM32WB55 chip. In console after run command I got error:
```
PS C:\Users\pawel> C:\Users\pawel\AppData\Local\Programs\Python\Python37\Scripts\…
-
Hi,
I am porting the optiga TrustM and AWS FreeRTOS in stm32wb55.
I also port the pkcs11 for optiga trusm.
When I run the aws_test code with testrunnerFULL_PKCS11_ENABLED config set to 1, it fail…
-
Hi rubenmiddelman.
I have searched in all the code where the "modelId" and "manufname" parameters that the STM32WB55 sends to Zigbee2Mqtt are defined, but I'm unable to find it.
Do you know wher…