-
Hello,
I´ve uploaded a MicroPython bootloader to study using Thonny IDE. That´s Ok and works fine!
The problem is: Now i have to use the arduino IDE again, running with the stock firmware (af…
-
Can anyone upload stock firmware for HMUF02-V05 dongle?
for the specific specs:
motherboard - HMUF02-V05
CPU - MSM8916
RAM - Hynix H9TQ32A4GTMC (4Gb+512Mb)
modem - WTR1605L
Wi-Fi - WCN3520
-
Hi,
First of all, thank you dev so much for bringing this to RG35XX.
I would like to request the installation for the Stock/Modded-Stock firmware. A similar issue has been created but was closed …
-
I smashed my diamond display. Is there a way to view battery level in the SuperDuper app?
or is there a way to view it in the stock S73 app without risking a firmware update screen, since I use the…
-
I have two quansheng uv-k6, if I configure D-RSP/D Resp option to REPLY or BOTH and make a DTMF call between them with stock firmware it works without problem.
If I load EGZUMER in both walkies it al…
-
When pressing the call button in aqara app it is shown OK in the app but no sound from the doorbell speaker. Can it be caused by your firmware? Is there any way to roll everything back to stock?
-
I'm trying to update the firmware on my old Netgear R7000. I initially tried flashing it with the latest DD-WRT beta release (2024), but I wasn't satisfied with it. I decided to revert to the factory …
-
Hello, on my 35XX-H I have stock ROM on a 64Gb card. When using the update package after copying everything to the APPS folder, it gets to the Select Upgrade No Yes screen. Then it freezes up and I …
-
### The problem
Not sure if this is a bug or a feature. I use the Merlin firmware on my AXE16000 and I love your home assistant add-on. I use the firmware available, and latest firmware features of y…
-
Reset is possible through the webUI however a reset daemon that monitors internal buttons should also be able to trigger a reset, like stock firmware does.
Can possibly link to the gpio_button env …