-
Has anyone had any luck reading/writing the 450mc chips? I've noticed they are slightly different in how they store everything (UID is 23-xxxxxxxx, no eeprom file but a "rw" file, "rw" file shows as …
-
is it possible to do this for the Stratasys F123 Series Catridges?
-
Hi everyone,
is a way to reset eeprom for stratasys **f270**?
**thank you so much**
-
My university got an Stratasys F370. Since I created [this resetter](https://www.thingiverse.com/thing:2636435) for the Dimension Elite for my former school, I was curious, if these chips can also be …
-
I currently have Version 7.0 Build 1866 firmware running on my Dimension 1200es (firmware circa 2007). I see that the latest available firmware is Version 10.1 Build 3810 (firmware circa the past ~2 y…
-
Others have mentioned checksum errors when decoding UprintSE eeproms, as in issues [52](https://github.com/bvanheu/stratatools/issues/52) and [55](https://github.com/bvanheu/stratatools/issues/55). It…
-
Is is true, that the machine numbers the machine numbers are the same?
https://github.com/bvanheu/stratasys/blob/master/stratasys/machine.py#L11-L15
`"ktype": "6B2A268B5ED3374A"`
`"uprintse": "6B2A26…
256FF updated
4 years ago
-
As I see it, the generation of support material in PrusaSlicer is somewhat crude and primitive. Stratasys's slicers shape the support incredibly well in my opinion. For example, here's [this](https://…
-
Hello Everyone,
Well, I'm writing this post because we recently bought a Stratasys Fortus 450 and what a surprise, the cartridge have a new black eeprom with the slot on the side instead of on the…
-
I've read the source code, but I haven't figured out if this plugin can be used to automatically detect the Z difference between the nozzles of each extruder.
![photo_2024-01-07_04-19-22](https://g…