-
### Describe the bug
The copter does randomly disarm in flight and it looks like the flight control is frozen. Unplug and connect it again does make it working again. The hardware must be okay, becau…
-
## Current Behavior
ELRS v3.4 added the support for the PPM input. This allows using ELRS Tx modules with older radio systems (Futaba, Hitec, Graupner, etc.). These systems are still very capable, es…
-
Thanks for providing a SUMD2PPM program.
Very useful if I can make it works :)
Got the following error message with arduino 1.8.0, Teensy LC board selected :
In file included from /var/folders/0…
-
Currently trainer data can be send to serial1 or serial2 via SBus protocol.
It would be handy to get this possibiliy also for IBus and SumD protocols, especially because these are non-inverted protoc…
-
This is only a feature request.
I like to see, that TL deal with more than 9 channels, if the Tx/Rx can do that.
My Graupner perhaps can deal with 12 channels.
An other guy implement Graupner SUMD an…
-
## Do not use this algorithm
**The problem is that there is a sweet spot in attacking, shown here:**
![image](https://user-images.githubusercontent.com/18004719/40413003-be4c0a88-5e42-11e8-8c8a-…
-
```
What steps will reproduce the problem?
1. Configure program correctly to see iphone. Check status returns On and
Powered.
2. Set time out to 15 seconds to ensure prompt response.
2. Configure scr…
-
```
What steps will reproduce the problem?
1. Configure program correctly to see iphone. Check status returns On and
Powered.
2. Set time out to 15 seconds to ensure prompt response.
2. Configure scr…
-
```
What steps will reproduce the problem?
1. Configure program correctly to see iphone. Check status returns On and
Powered.
2. Set time out to 15 seconds to ensure prompt response.
2. Configure scr…
-
```
What steps will reproduce the problem?
1. Configure program correctly to see iphone. Check status returns On and
Powered.
2. Set time out to 15 seconds to ensure prompt response.
2. Configure scr…