-
I've mostly figured out the VTech V.Smile sequence format (it's also used on the LeapFrog ClickStart and a lot of other SPG2xx devices, but I have yet to make an extractor for those). Attached below i…
-
I have a webcam like this: (130 deg model)
https://www.aliexpress.com/item/1005005249688226.html
lsusb list it as:
ID 1bcf:0b09 Sunplus Innovation Technology Inc.
It might show picture intermi…
HD78 updated
6 months ago
-
### Please confirm there isn't an existing open bug report
- [X] I have searched open bugs for this issue
### Summary
When I boot my laptop the keyboard backlight works as expected. When I close th…
-
### Checklist
- [X] I acknowledge that support is provided on a best-effort basis.
- [X] I acknowledge that the authors and contributors to this repository cannot be held responsible for the results …
-
Would it be possible to create distinct branches in the tibbo layers, to support at least the LTS Yocto releases?
Dunfell is coming to its end, so that would make `kirkstone` and `scarthgap` to maint…
-
Hi,
I manage to install Arch linux on my galaxy book pro 2 360. For now, I didn't try to patch specific things but I will try to update this issue as a reference of what I've done to make it works.…
-
The default environment contains this in `boot_normal`: `run uenvcmd; fatload mmc 1:1 ${loadaddr} ${bpi}/${board}/${service}/${kernel}; bootr`
`bootr` is a Realtek-specific command and unavailable …
-
I have it compiled and running.
Ran
nc localhost 4545
d
No output
lsusb gives me
[lmb1@100ALMB1 ~]$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002…
-
Just reinstalled my octoprint setup. This is an Odroid H2 running Alma Linux 9.3. Some colors through the webcam are way off. First picture shows orange parts on my Sovol SV04. Second pic shows them i…
-
Hi,
I installed the latest version with support of kinect #1473 support (btw thanks to all contributors) on my Ubuntu 13.10 64bits box.
After installing, I tried glview and it kind of worked except t…