-
Paul, thanks for your great work. I'm currently like to connect an SVM to a RasPi for an indoor tVOC sampling and logging campaign. I followed your recommended steps in compiling the bcm2835 driver. E…
-
Hello,
can you add support for sgp30 with external tem/hum sensor?
Thank you
-
Hi,
the header `printf.h` of this libraries yelds to compiling errors with some newer version of ESP32,
if none of its functions are used (basically, a warning which is used as error by default co…
-
First off, thank you again for your support helping me get things working with my SCD30!
I have a SVM30 and was curious if the SVM40 Example (Example 5) could be easily adapted for this older versi…
-
I'm fairly new at coding but I did try and implement your example usage code into my Arduino code but it didn't seem to work for me. I included all the required Libraries and made changes as list in t…
-
Hi,
It would be great if humidity compensation using an rH value could be added soon.
How about?
-
Current issue is that Most drivers are written in C and not in Python.
The following sensors need investingation into driver possibilities.
- svm30 (Sensor Bridge)
- scd30 (Sensor Bridge)
- sps3…
-
Hi,
I know this is a Issues category, but can you please point me into a right direction to implement the SVM30 on Arduino ?
Thank You.