-
Hi,
Compiled your code just fine using Arduino IDE set for Arduino R4 Wifi board.
However, when I tried setting board to ESP32 Dev Module (or other basic ESP32 boards), compilation failed. Is th…
-
PR #251 currently adds support only for sx127x, though similar functionality for sx126x requires only calling the `GetRssiInst = 0x15` Op and returning the result.
-
Looking at:
https://github.com/chandrawi/LoRaRF-Python/blob/67cb5c96fd4bb95db57e176590ced4b78b3f1192/LoRaRF/SX126x.py#L103-L105
and then comparing that to:
https://github.com/chandrawi/LoRa…
-
I was trying to work around this issue https://github.com/Lora-net/LoRaMac-node/issues/1594 by calling `Radio.Sleep()` after LoRaMAC init with NVM restore. My initial issue is this one https://github.…
-
After creating this issue
https://github.com/PaulSchulz/esphome-lora-sx126x/issues/1
I build new hardware with ESP32 and SX1262(Waveshare) module, but it is not working
Previously I am using th…
-
There seems to be a mismatch between the size of the local arrays that hold the return value at functions in sx1262.c and the actual return value as it is states in the datasheet https://semtech.my.s…
-
### Description of defect
We are using a STM32L151CC on a custom PCB, with a SX1262 radio, its roughly based on a Nucleo-L152RE board + SX1262MB2xAS design.
Everything works reliably until w…
-
when reading the buffer RX ( **sx126x_read_buffer** ) , if I read as many bytes as the **sx126x_get_rx_buffer_status** function says, there is random data. In order to retrieve my frame is to read 255…
-
Hello,
I would like to integrate the esxp1302 code with Tasmota to take the benefits of sending any data over MQTT with 8-channel LORA.
Tasmota has already this capability, named bridge, but for si…
-
Hi, is there a way to support ebyte E22400M30S Modules?
1W Output and rx preamp onboard.
Kevin (DL5OP)