-
Will it be possible to add a sx1272 example? The integration of this board seems more complex for me due to the DIO interfaces integration.
Thanks a lot
-
I've got an SX1272 module, which I thought would be supported by this library. However, the version (or Semtech ID) I am getting at the address 0x42 is 34 as per the product [datasheet](https://www.rf…
-
The CW transmitter code posted requires SX1272.h, however that is not included or the suitable source referenced. Would be great to link to it.
I believe this may be the one used: https://github.co…
-
![image](https://user-images.githubusercontent.com/11488460/202700779-610939ab-19e7-42c1-a507-fcb4d68d9528.png)
working :)
-
Syntax Error when making "make sx1272 BOARD=NUCLEO_L073 MODEM_APP=LCTT_CERTIF" . Seems that Error occurs showing that following objects are used without declaration: RADIO_BUSY_PIN, RADIO_DIOX, HAL…
-
Hi,
I'm using your RPi image for low cost gateway. It boots fine and I would like to test communication with a end device.
I bought some [ST LoRa demo boards](http://www.st.com/en/evaluation-tool…
-
Hi,
Im using a Semtech LORA SX1272,
I already load the program on my arduino Uno but its not reconized by the programm,
How can we fix it ?
Friendly
Lucas.E
-
1) SX1231 and SX1233 are not LoRa capable ICs
2) there is no SX12732 ICs in the Semtech LoRa products list, but the SX1272 is there.
-
I have Arduino Uno & sx1272 chip.
I want to upload raw.ino. But i don't know the way connect arduino uno & sx1272 direct (**PIN MAP**)
anyone know about arduino uno & sx1272 connect directly ??
-
With the Feather M0 Adalogger we use the [FeatherWing - RFM95W 900 MHz](https://www.adafruit.com/product/3231) shield, this has the SX1276 chip. With the Waspmote we have a shield with the SX1272 chip…