-
Hi, is support for the Sx1278 chip planed?
-
I found an error in the pinout of the LoRa module for the ESP32 board.
The correct pinout is in the picture:
 (433MHz)
[LoRa32 V2.1_1.6](https://www.lilygo.cc/products/…
-
### Describe you new feature you'd like
The SX1278 seems to have similar capabilities as the CC1101, and it is available with ESP32 on a single board (LilyGo LoRa32). There is a project (https://gith…
-
Hi there,
I'm trying to compile the firmware for the ESP32-C3 and a SX1278 (my goal is to make the cheapest RNode possible)
 by sx1278 node?
-
Hello,
I want to use sx1278 with raspberry pi 4 to receive data from Arduino with the same module. I don't get any message and when I run test_lora.py i get one test fails.
```
F.....
===========…
-
I connect Raspberry 3 with the SX1278 radio module.
My SX1278 radio module supports 433MHz, so I edit the global_conf.json:
![image](https://cloud.githubusercontent.com/assets/11706254/21953721/087…
-
Hai..i am doing project using lora sx1278...why the data from transmitter cannot be transfer to receiver..both lora was already connected..any idea ?thanks