-
This UPS works fine using the blazer_usb driver.
I use this UPS for my TrueNAS server. The OS forces you to configure NUT via its GUI interface allowing selection of only one of the HCL-listed dev…
-
I added a Cisco SX80 codec using this plugin and then I configured a button action to trigger camera presets. Although Companion shows that it is successfully connected via SSH, the button does nothin…
-
http://www.tourerv.ru/forum/viewtopic.php?f=10&t=25635
Стойки KYB
зад:
KYB Excel-g 341111 GX81(88-92)
KYB Gas-a-just 551079 TOYOTA MARK II(MARK 2),GX81KYB 341152, 551080 Кузов:SX80/LX80/YX8…
-
Sorry for posting as an issue, discussions aren't enabled.
I have a C40 and several P60 cameras. Would love to test any camera controls.
-
Ability to interface the xAPI on Cisco Webex Devices running CE software. This would enable more sophisticated use of these devices in event productions. Check out this git repo: https://github.com/Ci…
-
Some devices use `"` in the platform name, which causes the IOS parser for `show cdp neighbor detail` to throw `SchemaMissingKeyError`. An example of the output is:
```
Device ID: SEP009E1E43AC48
…
-
Interesting one I've noticed on system boot. Logs appear to indicate that the connection is timing out while establishing the interactive shell. Under this failure mode there appears to be an event or…
-
add link to getting started guide
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce92/dx70-dx80-sx10-sx20-sx80-mx200g2-mx300g2-mx700-mx800-room-kit-getting-started-guide-ce92.pdf