-
Hi,
I flashed a new Lilygo T-Display S3 Amoled V2 (H713) with Nerdminer2 1.6.3 LilyGo T-Display Amoled on https://flasher.bitronics.store/.
The display remain blank while I am able to access the …
-
For the life of me I cannot get this device to upload files to the filesystem.
i have an HTML in my projectroot/data=index.html
and i have properly defined littlefs in my platformio.ini
anyon…
-
I've been struggling for a couple of days now to make the Lilygo S3 work with the code. This device should be fairly similar to the configurations for the BOARD_HOMBERGER or the PLATFORM_BOARD_NODEMCU…
-
I can't seem to find anything about a recommended battery size or anything to do with a battery which would fit in the shell of the device. I would very much appreciate any help :)
-
I just got [this new board](https://github.com/Xinyuan-LilyGO/T-Display-S3-AMOLED), which seems to be a variant of the original T-Display-S3 version. It has an AMOLED screen with a higher resolution (…
-
The t-display is fairly new and has some potential. Didn't know if you were going to look into this device. Unfortunately I'm more an operator and trying to learn microcontroller programming.
-
Please update T-Display-S3 Setup206_LilyGo_T_Display_S3.h. The local lack of definition of CS will cause some devices to not work properly.
[Setup206_LilyGo_T_Display_S3.h#L20](https://github.com/B…
-
When you have a NerdMiner V2 which was already configured once and then try to switch the network, you will get a hashrate of zero.
Version: 1.6.3
**Easy Fix:** Just reset the Miner by pressing …
-
Running FW 3.2.2 on a lilygo-t-display-s3. Works fine via USB, but under battery power LCD is powered off. GPIO15 must be set HIGH for LCD to turn on when powered only by battery.
Also, battery v…
-
PIO Core Call Error: "Resolving lilygo-t-display-s3 dependencies...\r\n\n\nUnknownBoard: Unknown board ID 'lilygo-t-display-s3'"