-
For some reason on the latest release when I click setup it just beeps and nothing else. From memory it used to work on the earlier versions
-
Hey, great project!
Just wanted to ask how hard would it be to make the display communicate with klipper through the mainboard instead of the Rpi? I know someone accomplished this for the [T5UID1](ht…
-
HI,
i tried to flash the file on my LK4Pro screen but nothing show exept marlin splashscreen, i installed a modified touchscreen firmware for marlin before si i use your T5UID1.cfg to reset it. i see…
-
I encountered this problem, while trying to print a gcode file whose name included this non-ascii character: [æ](https://www.codetable.net/hex/e6).
The attached snippet from Klipper.log shows what …
-
I'm not sure what's happening. I'm starting with the printer.cfg from repo:
https://github.com/bassamanator/Sovol-SV06-firmware/tree/sv06-plus
I add in the [t5uid1] section to printer.cfg. The to…
-
Looking to use my stock Ender 5 Plus screen along with SKR Mini E3 V3 & Klipper. Installed Desuuuu's DWIN_SET on screen and Desuuuu's klipper branch. There is no "[dgus_display]" within the provided …
-
Symptoms:
SAVE_CONFIG fails
Components and Versions affected:
DGUS-Reloaded Klipper Component - v1.2.8 and earlier
To reproduce this problem:
1. Restart or Firmware Restart Klipper
…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I got the LK4 PRO Board with DMT48270C043_06WT touchscreen LCD.
I honestly have no idea whic…
-
I hesitated to report this because I suspected it wouldn't work and of course it didn't.
Upgrading firmware to v0.12 doesn't work due to the custom repo that this project requires. If it's possibl…
-
Kindly consider implementing T5UID1 touchscreen support into Klipper master branch.
Where [dgus-display](https://github.com/Desuuuu/klipper/tree/dgus-display) is the most interesting branch/approaxh.…