-
Support for CANBUS R53 Mini Cooper Tachometer with LCD (to display different engine parameters). @nmschulte is helping with this
-
hi @aakashjhawar
great work! πππππ
i'm sharing your project on my own "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardwarβ¦
-
### Variant
HOVERCAR
### Control type
FOC
### Control mode
Torque
### Description
I got a display, speedometer, odometer. It can sense speed through one of the engine phases or "one line instruβ¦
-
hi @brucemack
great work! πππππ
i'm sharing your project on my own "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware/wβ¦
-
hi @rtbaker
great work! πππππ
i'm sharing your project on my own "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware/wikβ¦
-
Is the "fan0 tach" pin in the schematics actually connected to anything?
-
hi @PCrnjak
great work! πππππ
i'm sharing your project on my own "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware/wikβ¦
-
I have some code, originaly built against grbl-mega, which adds an onboard tachometer to grbl-2560 varients.
The system works with a cheap chinese tcrt5000 based opto sensor ($2) and a small pieβ¦
-
hi @T-622
great work! πππππ
i'm sharing your project on my own "Open Hardware Electronics for the Volvo P2 platform"
[https://github.com/aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware/wiki/β¦
-
Was using your guide on the tach 3-pin hotend fan from Orion and noticed that Klipper wasn't reporting the RPM when attached to my Huvud CANBUS pcb when attached to 5V endstops. https://ellis3dp.com/β¦