-
Hi all,
apologies for raising an issue, but I'd appreciate if someone can help me with the following questions:
1. Are Quantum and IBM drives (with matching look) the same ?
According to some …
-
Hi there,
I'm finding tape emulation to be very unreliable and it's getting a tad frustrating.
I'm currently typing in a pretty large BASIC program in 8xxx series PET and because I cannot get th…
-
Tar is an open format and is easy to use (with `tar c(x)vf /dev/st0 ...` ). It can support lto4 and older tape/drives, which are much cheaper.
Edit: tar tapes can even be accessed on windows using …
-
In the initiator mode documentation I saw this line `Support for Tape Drives and other Targets is currently unknown, and would require test devices` so I wanted to share notes from my test with that.
…
-
I continue to get this error using Amanda 3.5.1 on FBSD 14.0 (GENERIC kernel). The error has occurred with 2 tape drives, and with multiple tapes.
`hostname/ lev 0 partial taper: Error writing blo…
-
**Describe the bug**
When a tape cartridge with a **write permanent** error is trying to be mounted and the MAM (cartridge memory) attribute of the Index Partion (IP) stores a generation number **l…
-
Currently there seems to be an inablility to set the playback speed/volume on the portable tape drive, while volume is less of an issue the playback speed makes some tapes unusable.
-
Using FluxEngine + Greaseweazle on MacOS:
I have the Greaseweasle working with `gw` with a DD disk drive from an Atari ST (drive ID 0 and straight non-twisted cable) and using a command like `gw re…
-
I think there's a problem with init not failing early when the model is not found?
Trying to format a tape with a bad config segfaults as follow:
```
(gdb) bt
#0 0x00007fb4a0cbc58b in __strcmp_…
-
Will store snapshots for a set period of years. independent of inactive records retention
using something like Glacier or Near-line storage