-
Thousands, maybe millions of Tasmota devices, based on ESP8266 cannot issue encrypted MQTT messages.
This is a huge security issue.
The devs there cannot provide encryption on these small devices (…
-
Hi,
I have been using your excellent program for several years. I can control my AC, but the real HA commands in the last monthes are almost undetectable between the several thousands of error mess…
-
MQTT is a pretty versatile, lightweight and simple protocol which allows data export to platforms in order to improve monitoring, specially where there are a reasonable number of devices in order to i…
-
Hello,
I would like to integrate the esxp1302 code with Tasmota to take the benefits of sending any data over MQTT with 8-channel LORA.
Tasmota has already this capability, named bridge, but for si…
-
Hello,
It would be great if there was a tutorial showing how this can be used for simple switch devices using Node-RED.
Best regards,
Dax.
-
Can I make a DevkitV1 esp32 working with tasmoticz
I only need to pass through one GPIO port (GPIO1 now) as hardware switch with MQTT
Can't get it to work, just reset everything to default in the es…
-
# Programming the Wemos S2 Mini with Tasmota: An Easy Guide for ESP32-S2 Devices | Dialedin
Get the most out of your Wemos S2 mini by programming it with Tasmota. This ESP32-S2 based device features …
-
Is there a method to flash the firmware without using Telnet? Every time and method (OS) I've used just continues to disconnect and doesn't end up uploading the new firmware. I'd prefer to do it over …
-
[Tasmota](https://github.com/arendst/Tasmota) is a very popular open source firmware for ESP8266 based devices. It is used in many home automation systems.
It can send and receive IR codes via WLAN…
-
[Tasmota](https://github.com/arendst/Tasmota) is an alternative firmware for ESP8266 based devices like [iTead](https://www.itead.cc/) Sonoff, which - besides other things - is able to do control and …
amotl updated
4 years ago