-
Hi, about DNP3 Client Driver there are bellow issues:
1) The DNP3 Client driver should be run on Windows and if we have Linux normally the Wine system has problem in most cases. Is not possible to ha…
-
I have a Modbus client that is sending multiple commands with the click of a button to the Modbus server of OpenPLC. Sometimes, some of the last Modbus commands are not executed by OpenPLC.
### Det…
-
I am trying to connect to Prosys Simulation Server while developing code with this library.
If I connect with SecurityMode None or Sign, it works without issues. But when connecting to the server w…
-
Hi, thanks for your modbus library. I found an issue when I use this library. So I report.
### What happens
Modbux.Tcp.Client terminates when TCP response contains 2 payloads.
Following is the …
-
# Bug report
### Bug description:
Client loggers on TCP using a socket stream can timeout. A TCP logger server could issue disconnect to TCP client due to timeout caused usually by no activity a…
-
I wrote the tcp server example and the single-process mode is fine. The new question is, in the multi-process, multi-machine, or multi-replica deployment, how do you find out which replica a given cli…
-
As of draft-ietf-httpbis-connect-tcp-05, connect-tcp now optionally supports the capsule protocol. However, this optionality adds non-trivial complexity to implementations. As currently written, if a …
-
HI all,
I have a problem that the server is sending TCP RST toward the client. I have gone through the logs and I couldn't find the root cause of sending the RST.
tshark/tcpdump from server:
36…
-
-
```
pkg/http/websocket_server.go:85 > Error writing to websocket: write tcp [::1]:8080->[::1]:44472: write: broken pipe
```
this log maybe just cause be client offline. a warn log level make sens…