-
Hello, I connect my mount through ASCOM and with its respective driver (syncscan app) and everything is fine, I can control the mount perfectly with stellarium, but after a few minutes, or sometimes j…
-
While developing a modification for the CCDCiel internal guider we noticed the following:
RA & DEC dither pulse commands are executed sequential. First the RA then DEC dither pulse is processed.
…
-
Hello,
when I connect from remote with Ekos, indiserver provide the "indi_simulator_ccd" and not the IMX 477 or libcamera or indi_rpicamera and photos are all black:
pi@astro:~ $ ps ax | grep indise…
-
Hello,
I'm hoping someone can help please.
Firstly well done to AM for a great (and free) piece of software. Had no real issues once I increased the memory swap size to 5gb. But I've been trying to …
-
### Steps to reproduce
1. Open telescope control plugin
2. Connect to LX200-compatible telescope. It state changes from 'Stopped' to 'Connected'
3. Remove used connection serial port (/dev/ttyU…
-
### Expected Behaviour
Synscan App connects to Stellarium via ASCOM and shows location of scope
### Actual Behaviour
SynScan App connects but Stellarium fails to gather RA/DEC location of the tel…
-
When looking at the visibility tracks for LCO telescopes, some targets appear to be observables from 1m locations earlier (or later) than they actually are. Although the tracks are correct, and the ta…
-
### Description
I'm using `nosduco/remote-sshfs.nvim` to work remotely over sshfs.
`nvim-tree` doesn't show anything from the mounted folder on the server, however, you can perform edit operations…
-
I had gpio working with "AllSky"; decided to check out "Indi-Allsky" and am getting the following error (I have a dew heater and fan devices installed and setup; I re-ran setup script to make sure gpi…
-
### Discussed in https://github.com/Stellarium/stellarium/discussions/2506
Originally posted by **muggsie** July 6, 2022
My CEM70 mount is having a communication problem with Stellarium. Whe…