-
I run the docker container on Ubuntu 20.04 on ARM. I have tried just about anything getting the daemon to actually detect the USB device connected, but to no avail.
The telldusd process starts and …
-
I keep getting this error.
I'm not sure what UUID it is referring to. I can mention that I previously used the tdtool based homebridge plugin.
```
/usr/local/lib/node_modules/homebridge-telldus-t…
-
Hi,
The instructions specify:
```
git clone http://git.telldus.com/tellstick-duo.git
```
However, that URL (alias) is apparently not working or not forwarding.
[https://github.com/telld…
-
Hej! Jag är relativt ny på docker och lyckas inte få in min tellstick duo...
Den är ansluten på /dev/bus/usb/003/005 i min unraid-server men när jag skickar
- /dev/bus/usb/003/005:/dev/bus/usb så få…
-
Hi,
Thanks for the nice software. I managed to get it working for my new Tellstick Net and some selflearning switches but I run into problems with my self learning dimmer. I have a previous setup w…
-
Hei! Jeg ser du tar imot spørsmål på svensk, så da går det kanskje på norsk også? 😉 Jeg oppdaget denne tilfeldigvis i dag, og det kan kanskje hjelpe meg stort! Jeg har tre Pi-er som ennå er på Buster,…
-
I have a **Tellstick Net V1** (which cannot run locally) and recently got a **Tellstick ZNet V1** (which cannot receive 433 MHz). Since I have a couple of 433 MHz temperature sensors that I want to us…
-
Hi !
If I restart the mosquitto server, i have to restart the container to control my devices again .
-
Thanks for making a driver for cheap and readily available cards! I was hoping I should be able to get an RTL8188ETV card working with this, so I bought a few of them after I read a posting that this …
-
About the only thing I'm missing here is event support, I hope to see it further on.
fldc updated
10 years ago