-
Elitech RC-5
-
Link to product page: https://www.picotech.com/data-logger/pt-104/high-accuracy-temperature-daq.
There seems to be more than enough software available to create a service before the product arrives…
ehpor updated
1 month ago
-
Hello,
Setting a temperature to more than 1 climate (on koolnova) fails. Only one is set properly. Worst : if you set them in a row, it fails for both.
I found a workaround which is to set a pause…
-
Hey, thank you so much for developing this!
I've been trying to set up this component recently, using a Wemos D1 Mini esp32, thehognl opentherm shield, and a Viessmann 050-W combi boiler.
Howeve…
-
I have 2 UX360 thermostats (upstairs and downstairs). Only the downstairs device shows up with a configurable temperature, listed as "Zone 1", but will not work because the ID is duplicated with the …
-
### Checklist
- [x] I checked for similar existing issues (both open and closed) before posting.
- [x] I am running the latest version.
### Expected behavior
I have some Bosch [BTH-RM230Z](h…
-
From time to time it might be interesting, which temperature the hotend/bed actually had for a given time.
This can be interesting for firmware enhancements (optimization of controllers) but also in …
-
### Link
https://de.aliexpress.com/item/1005005978316733.html
### Database entry
{"id":12,"type":"EndDevice","ieeeAddr":"0xa4c138b01b585562","nwkAddr":4688,"manufId":4417,"manufName":"_TZE200…
-
### The problem
When using fahrenheit for Home Assistant, the Huum integration assumes the temperature is always celsius and limits to 40-110, and does not convert to test the limits. For example, …
-
Hello, I am using both the scheduler component and the scheduler card with a Tado heating system.
I have it setup as per the screenshots below
It is supposed to set the heating to 21C twice a day…