-
**Description:**
There is a bug in the current temperature reading functionality where the temperature reading occasionally becomes null. This issue is particularly noticeable in the Home Assista…
-
Installed v.0.2.5 on Home Assistant v.2023.9.3 via HACS v.1.34.0.
As of 4:30pm ET yesterday, the temperature reading/control is showing unavailable. The kWh energy readings, however, are still upda…
-
### Guidelines
- [X] I checked for duplicate suggestions
- [X] My suggestion intends to add or improve something
### Version
Development (Unstable)
### Topic
A design problem (e.g. clunky UX, a b…
-
Temperature sensor readings are too high, which could be caused by a battery heating up during charging. Can the battery be moved further away from the sensor?
-
Hi Piotr,
I got your component working on TTGO display. Sometimes it does not react to the command but also in my case I am getting wrong reading of current temperature.
![image](https://github.…
-
Thank you for the good code, TUYA electrical appliance scale correction. I had the same problem, 10 times higher readings.
However, activating TUYA Fix also changed the TUYA temperature and humidit…
-
At this moment two possibilities for room temperature readings are possible: internal temperature and an external wired sensor.
I would like to use a temperature reading connected wireless to HA as t…
-
I am using:
* A custom board based on the Leonardo (Atmega32u4)
* TMAG5273A1
* Arduino IDE 2.2.1
* SparkFun TMAG5273 Arduino Library 1.0.3
* Board powered by USB at 5.08V, serial port workin…
-
The Hanshow Nebular 350 tags are reporting a temperature of 0.
I have checked and can confirm the ATC1441 BLE firmware is able to report temperature. So would love for this to come across to OEPL.
-
I believe this should be relatively straightforward as the AC system supports central control. It would be highly beneficial to have the option to use Home Assistant (HA) sensors to provide temperatur…