-
Hi,
The workings of the internal temperature sensors is not straightforward and I am trying to make sense of `asset_parser.json`.
```
"value_temperatura_sonda_principale": {
"path": "GET…
-
### The problem
The temperature value from TOON integration now reports 'unknown'. The TOON itself is measuring the temperature just fine. It is not available to HA.
### What version of Home Assist…
-
This is a template issue from the project to get more SkodaConnect sensors into `homeassistant-myskoda`.
**Sensor**
Outside Temperature
**Last known status**
No support in MySkoda API's discov…
-
**Is your feature request related to a problem? Please describe.**
Inside temperature sensor within the nspanel is really inaccurate, we can "calibrate" that with an offset, but during the heatup of …
-
### Feedback
Under the Entitäts-ID sensor.aussentemperatur is shown the temperature in the heat pump.
The temperatur of the "Entitäts-ID" sensor.aussentemperature is a temperature, that you can fi…
-
Please post tech info and app screenshot as described at [here](https://github.com/crystalidea/macs-fan-control/blob/master/how-to-post-tech-info.md).
-
I’ve set up my ESPHome using the micronova external component, and I’ve noticed that the reported water temperature is consistently half of the actual value. This issue persists despite correct wiring…
-
Is it possible with this board to use an external temperature sensor?
I currently have two TZ models. They have a theoretical lowest power consumption of 200W. However, I have only seen it when the…
-
First of all, I know there is similar issue closed, but I face strange sensor behavior too (MBP 13 2020 10th gen, 10.15.7)
After some period of time (hours, days) and several wake-sleep counts (wit…
-
Hey, thanks for documenting the whole process of disassembling the Bambino! I am currently building custom firmware (based on your tear down) for the Bambino, and I would like to know if you have any …