-
### Describe the bug
System is stuck in infinite loop when bootloader attempts to upgrade the firmware, but the EEPROM is write protected.
I would expect the bootloader to not attempt a firmware u…
-
Hello.
I have a ethernet only, 8MB flash version of a camera with this SoC.
I flashed the openipc-hi3518cv100-lite-8mb.bin file onto it via TFTP and after executing the command "RESET" the camera …
-
At netboot, a Raspberry5 board sends malformed UDP packets padded with zeros while pulling resources from the TFTP server. As it may be seen in the `raspberry5_ack_pad.pcapng.gz`, a Raspberry 5 may ac…
-
Not really an issue, but I was wondering a few things. I have managed to build an image for my router, and it works using the initramfs image. I would like to flash the router now.
I have read th…
-
Were I to design this bootloader from scratch, I would have the device connect to a server with a known IP during boot, check a version, and update if the version is different. I'm not sure how much w…
-
How can I do this operation (and similar operation with TFTP):
> 6) Finally we TFTP'd the newroot.bin file to the device and used the bootloader command FLW to write it to flash.
Give please a ste…
-
### Describe the bug
The raspberry Pi 5 PMIC does not make use of 5000 mA current offered by a charger via USB-PD PPS profile. Instead, it gets stuck at 3000mA even when a charger that advertises a P…
-
_From @whitesn on August 18, 2016 6:26_
Hello, so I am able to burn the bootloader and upload the "ReadNetworkSettings" sketch using Serial USB Comm.
I am also able to ping the default IP when the A…
-
I have two Linkplay A31 modules that differ in their behaviour. I try to document these modules here and maybe get some more info in the process.
# Module 1 - Originally installed on Arylic Up2Stre…
-
### Describe the bug
This report is inspired by https://github.com/raspberrypi/linux/pull/6273 and the not so sympathetic reaction to it on the Linux kernel mailing list.
I attempted to accomplish…