-
-
- Check for what speed we need a new nosecone
- Casing for thermocouple for measuring motor exhaust temps.
Made branch /feature/heat_modeling
-
Primary concern is the battery, that needs to be managed nicely, secondarily the two boards need to be able to manage thermals as well (keep them above -20 ideally)
-
-
Dear Developers,
Is it possible to run a coupled thermal-displacement expansion simulation with a varying thermal profile (passed as an amplitude within abaqus) as a boundary condition?
I under…
-
## Summary
Related to #864. Writing out the thermal noise map from dwidenoise or patch2self would have two benefits: (1) eventually it could be used to implement a fit/apply structure in QSIPrep, o…
-
FLIR Lepton 3.5 > Lepton breakout board > Raspberry PI4
Base Code on [GroupGets](https://github.com/groupgets/LeptonModule/tree/master/software/raspberrypi_video)
Get the camera working locally
-
Thank you for publishing great works.
I have a question about thermal camera calibration parameters.
I use an equation (LiDAR to IMU) * (Thermal to IMU).T, but the LiDAR point cloud doesn't projec…
-
not seen on other devices
str2-7804-lc7 :
```
admin@str2-7804-lc7-1:~$ show reboot-cause hist
Name Cause …
-
Please consider the following MWEs
```modelica
package TestPartialArrayConnections
model Test1D_0D
Modelica.Thermal.HeatTransfer.Components.HeatCapacitor C[10](each C = 1);
Modelica.The…