-
hello together
I would like to use and control the relay via lora wan network thethingsnetwork. But I have not found a firmware yet.
is there somewhere a firmware for this purpose?
https://www.…
-
Do you have any examples for usage with TheThingsNetwork?
-
Hi,
I'm experimenting with my sensor, however it is not completely clear to me how I would proceed with connecting the sensor to LoraWan. Is this a possibility of completely out of scope of this pr…
-
### The problem
I can see data beeing processed via TTN Integration for my SenseCAP T1000 Tracker device:
>Message for device eui-xxxxxxxxxxxx ignored (type ): [{'measurementId': '4200', 'measur…
-
### Summary
Math rules strike again - there appears to be a minor re-encoding mistake on the RSSI field in the `uplinkMetadata` of `RelayForwardUplinkReq` that results in the forwarded RSSI to be 30 …
-
### The problem
The sensors provided by this integration cannot be adjusted in the UI and are therfore incorrectly displayed.
I would like to change the unit of measurent of these sensor (e.g. temp…
-
#### Summary
Please exchange a (dead) link with a new one for Frequency Plans in Germany
...
#### Why do we need this?
Avoid trouble for users when not having the documentation.
#### …
-
Hi there,
when trying to compile the DeviceInfo example for Board "Generic ESP8266 module" I get the following error.
Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Generic ESP8266…
-
**Describe the Bug**
When I setup monitoring for the cacti, I verified that the devices could upload to dirtviz when connected to my laptop. When I plugged them into a USB power hub, empty payload me…
-
In the Apple apps there is a signal meter Based on https://sensing-labs.com/f-a-q/a-good-radio-level/ and using the individual SNR values from here for the different spreading factors https://www.thet…