-
To connect multiple BMS in daisy chain manner (e.g. to implement stackable energy storage module) it seems that using CAN 2.0 bus would be most appropriate.
Can 11 bit DIP switches be added to assi…
-
(Feature request for consideration)
With an 8 bit identifier, that leaves 256 possible device addresses, minus 1 for the reserved source/destination of 255. For many systems, this is more than suff…
-
As suggested by @b0661, it would be good to get informed if a device got disconnected. If the device does not send regular statements with e.g. measurement values, one could require it to send a regul…
-
Currently there are special functions to scan for devices on serial and can ports. In my case the devices are connected by SPI. So I would have to add another special function and do some code duplica…
b0661 updated
3 years ago
-
(Feature request for consideration)
Have you considered adding support for CAN-FD to ThingSet? The increased payload capacity could significantly reduce the amount of overhead for each message (as …
-
(Feature request for consideration. This was based upon my reading of the previous spec, and may be out of sync with the concepts in this spec (such as the object tree))
I really like how the Thing…
-
https://github.com/LibreSolar/bms-firmware/blob/be7f58af9ec26121123eeffc57ef76564c7741cf/src/data_nodes.cpp#L211-L212
What would be the better solution to publish the individual cell voltages over …
-
**IMPORTANT**: The reworked packetized reports had to be fixed once again after it was first merged based on the specs below. See #30 for further details.
## Problem description
A definition for…
-
Hi Zenoh team. Just discovered Zenoh because of a Zephyr-related tweet and I find it very exciting!
I'm most interested to understand in detail how the protocol (especially the lower layer zenoh.ne…
-
I was able to build firmware using from master and develop branches using PlatformIO and provided instructions.
However, I was not able to find out by reading the documentation if changing the def…