-
HI, I see you started on a RP monitor for your Morningstar TS60. I have a TS60 as well and a self contained RP 3 that I use for my 3D printing as well as outdoor timelapse photography. The laptop I …
-
#### Steps to reproduce the issue
1. Click here: https://leandroperez.com.ar/en/contact/?id=contact-form-13184&g13184-subject=Prints
#### What I expected
The contact form should show Prin…
-
[logfile 2024-03-15.log](https://github.com/raspberrypi/picamera2/files/14615699/logfile.2024-03-15.log)
[TimeLapseCamera0.79.zip](https://github.com/raspberrypi/picamera2/files/14615719/TimeLapseC…
-
Hi all,
we tried on 3 devices; the most recent uses android 8 (motorola moto g5) but the crash is systematic.
- Action on the delay does not prevent it.
- Test of all the versions available on Fd…
-
I really like the camera command line program, I've been looking for something like this for a long while.
However, the options are very limited, and it also has a small bug, where the max resolution…
-
#### If this is a feature request describe it here
___REPLACE_THIS__FEATURE_REQUEST_DESCRIPTION_GOES_HERE
#### Version of Octolapse
Octolapse Version: v0.4.1
#### Version of Oct…
-
can anyone tell me how to change the resolution?
raspberry pi 3b+ with octopi 0.16 and pi cam v2 noIR.
the time lapse file is 640X480, how to change to 1920X1080?
THX
-
Hi what I still miss is bulb shooting to start with the EnterKey.
Play with it now for two days but it does not get to run.
With the touchlessRemote it seem to trigger the s2Key
```
public int p…
-
I was able to install the OpenMemories-Tweak-release-0.8.apk on the Sony QX1, but since there is no screen there is no way to open the app and change the settings.
Sony limited the QX1 in particular …
-
I have python program which is sending image over mqtt but also can save image to disk
I am using pizerow with original picamera, did install `python3-picamera2`
I did check, everything is updated
…