-
Hello,
I'm trying to connect a TMCM-3212. In the description RS 485 in mentioned. Will the module work with the USB/Serial devices, please?
>>> from serial import Serial
>>> import TMCL
>>>
>>>…
-
Hi All
In the TMCM-1311 HW Manual it is stated that a pull-up resistor can be enabled/disabled by software.
![image](https://github.com/analogdevicesinc/PyTrinamic/assets/20818031/9d6aad95-fb2e-…
-
Hello,
could you please add the TMCM 1110? Or is there another board similar enough so I can use that instead?
Thanks!
-
Could you kindly write the C code for the Linux platform, enabling us to communicate with the TMCM module over USB and control the motor?
-
Hi guys,
I don't know if this is the correct way to report "bugs" in your example routines, but as this one can be quite harmful to the motor, I am giving it a shot.
In line 22 of the rotate_dem…
-
Back in 1999 there was a little addon for Half-Life made officially by Valve named Further Data which included new player models, maps, sprays, a update for HL1 and Uplink. Could it be possible to rea…
-
The TMCM-3212 module is not detecting the home sensor when doing the reference search. I used the reference search code from the TMCM3110 module. Is this the correct code to do the reference search fo…
-
Back in 1999 there was a little addon for Half-Life made officially by Valve named Further Data which included new player models, maps, sprays, a update for HL1 and Uplink. Could it be possible to rea…
ghost updated
10 years ago
-
Hey,
when I do rotate left, like `motor.rotate_left(num)` where `num` is in [0,2048] the motor rotates left. If I put in values above that it starts turning right. There seems to be a bug with the …
-
Hello,
I have logs (from trendmicro console) in the following format (beside from the prefix)
Key