-
### Expected Behavior
When I restart my Raspberry Pi (and thus restart the Homebridge application), all previously added HS200, HS210 and HS105 units should still be in HomeKit with all automatio…
-
Hey, I have the HS200 and I have attempted to turn on night mode to turn off the LED, but it doesn't work. The WiFi symbol flashes, but the LED does not turn off. I attempted this same process on anot…
-
So while I was able to get everything up and running okay, I’m experiencing some odd issues in HomeKit that I’ve never seen before. Most of the issues come from my TP-Link devices showing “No Response…
-
### Expected Behavior
With solid network connectivity and unchanged IP addresses, I expect that state should be reported correctly and there should not be TCP timeouts.
### Current Behavior
I…
-
New tplinks won't work because of the firmware issue, so bought WeMo for new printer. The tplink will use the sudo shutdown now command to trigger power off on the raspberry, but that same command do…
-
Hi,
I own 2 HS100-EU . I bought one in 2016 and one quite recently.
I did check the firmware versions on both and the firmware do differ between both:
```
daniel@j3455:~/source/tplink-smartp…
-
Just purchased a shrink-wrapped HS105(US).
Attempting to search for available APs using `kasa --host 192.168.0.1 --type plug wifi scan` results in being unable to query the device on `netif`, then …
-
### Expected Behavior
After restarting Homebridge running on macOS Mojave, startup log looks normal. When turning Kasa smartplugs on/off within the Home/Eve apps the icons in the apps will i…
-
Please let me know if there is anything I can share with the strips I own to help get the support added to this great plugin!
-
Sometimes, after recording a session, when I go to start another the accumulated power doesn't reset.
A couple of possible solutions:
* Always force accumulated power to 0 when starting logging
*…