-
While sending data over a TCP connection using `tcp_send()`, the system crashes with a LoadProhibited exception on core 1. This issue occurred around the time the module is roaming from one Wi-Fi netw…
-
### The problem
HI,
Got an 433Mhz RF emitter and receiver on an ESP32.
Both my emitter and receiver are working properly.
I'm capturing this data (protocol:8) from my remote :
`[I][remote.rc_sw…
-
**Test Environment (required)**
- Platform: MEGA65R6
- Core Commit: 6d764c4
- ROM Release: Not yet released. See following to get the ROM: https://wiki.eilers-online.net/IEC-Core-Test
**Descr…
-
Hello everyone,
I'm currently working on a project involving two LoRa-E5 Mini modules, and I need to transmit data directly from one module to the other. My goal is to establish a peer-to-peer (P2P) …
-
### What happened?
[Nous E4](https://www.zigbee2mqtt.io/devices/E4.html) does not transmit battery charge data, or more precisely, it only transmits when the button on the sensor itself is pressed. I…
-
Hi,
I was just wondering if there's a way to transmit a data packet from the APGDT006 board through the wireshark extcap. Or if there's some other way to get the board to do a loopback test.
Th…
-
### Suggestion
The following is translated by software, so it may be a bit strange
I noticed that the Upload rate based mode of Upload slots behavior has a big problem:
1. The other party trans…
-
## Bug Report
node_metrics output plugin producing stale data for no longer existent network devices, it could be observed in mimir logs and file output dump.
It is triggered somehow by veth* virtua…
-
node_exporter isn't reading transmit data on enp1s0
### Host operating system: output of `uname -a`
Linux Mercury 6.5.0-35-generic #35~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Tue May 7 09:00:52 UTC 2 …
kcsf updated
3 months ago
-
In cases when there are both recovered and transmitted data, does the most recent upload by tag_num/tag_type overwrite the previous? For example, if I upload the transmitted data, then the recovered d…