-
The Open Trickler would benefit from a web-based UI (hosted at http://opentrickler.local) to allow:
- Users to control the trickler w/o a mobile app
- Admin functionality (firmware updates)
- Sho…
-
The Open Trickler is available for iOS through TestFlight using the following link:
https://testflight.apple.com/join/1XSoUPL3
It takes longer to develop iOS apps because Apple requires jumping …
-
#trickler I'd like to branch off and make the Pi code work with an Acculab V-1mg over a similar but slightly different RS232 protocol.
What files and variables would control both the RS-232 comms …
-
![rabug](https://cloud.githubusercontent.com/assets/21260178/23555939/01edb07e-002b-11e7-965d-81ee7103e5db.gif)
Reproducable by giving any ground unit the `CashTrickler:` trait.
Related to #1186…
-
FX-i is really expensive.
THerefore would be awsm to adjust for cheaper scales with slower measuring times! :D
-
Some folks have suggested adding support for an automatic powder drop, controlled by a servo. Anyone who has experience with this can chime in here with suggestions.
Since it's an optional feature,…
-
Shiny has an option called `shiny.autoreload` that monitors source files for changes and automatically reloads the Shiny app. It would be nice if Plumber had a similar option.
-
Hello guys,
I really like this project! I’m a electrical engineer but Unfortunately Im very bad in programming, I’m more a 400VAC guy... Can someone help me to re-write the code for a mettler Toled…
-
Hi ladies and gentlemen!
I want to share the experience to get the code running on a Raspberry Pi 3 B in combination with a G&G JJ200B laboratory scale (German manufacturer).
Eric was a great hel…
-
When the BT link is dropped (after Pi reset for instance), and then re-established, the target weight has not changed on the mobile app. It appears that the Pi believes the target weight is zero (def…