-
Hello,
I have installed the app and connected my mobile to the ESP32 board with default PIN. The pairing has been successful, however when I start reading data the connection gets lost and the app ke…
-
I've tried to use the cruise mode as is and I found it very disappointing. It's required long pressing of a button (the same can be reached by pushing throttle) or idle pedaling. Riding tens of kilom…
-
Either via UART, UART over power line, or Bluetooth
UART -- nRF52840 has 2 UARTs, so we can use the other one
UART over powerline -- save on cabling, and reuse the existing power connection
-
I am unable to discover or connect to the ESP32 by Bluetooth through the app.
I can see the TSDZ2-ESP32 in my android bluetooth settings and pair.
I can not see it in the app. (no discovered devices…
-
I am unable to discover or connect to the ESP32 by Bluetooth through the app.
I can see the TSDZ2-ESP32 in my android bluetooth settings and pair.
I can not see it in the app. (no discovered devices…
-
I'm running into an issue with my Georgi stenographic keyboard when using it in ‘fake steno/NKRO fallback’ mode. A common steno stroke for the pronoun ‘I’, the chord `RE | RU`, sends a Backspace inste…
-
Hi all, i finally upgraded both TSDZ2 and 850C to the latest OS version, but no startup, after 20sec the 'error brakes' is shown. As far is i could find this points to a communiction error. So i check…
-
Did I miss something when was making CI? Or is it just current state?
stsdc updated
3 years ago
-
Tested in v0.18.2 and throttle input is used and works as expected.
Configured using menu item 8 sub menu 0 set to value 2
Tested in v0.19.3 beta and verified throttle ADC readings are fine under …
-
Several users of TX protocol (Stentura, Flash, Gemini TX machines) have reported Plover splitting apart keystrokes. A user on the Aviary reports (http://stenoknight.com/plover/aviary/phpBB3/viewtopic.…