-
As a follow-up to my original question I managed to set-up a RPI3 to act as my in between and I did manage to flash the Beca with ESPHome Starter. So this seems to be an alternative route. However in …
-
I have a WP9 power strip that has a Z2-N-V1.1 in it that reports as having both Main and MCU running v1.0.4
reading through https://github.com/tuya-cloudcutter/tuya-cloudcutter/issues/598 they appe…
-
I'm trying to cut off from the cloud my "Deltaco SH-LE27W", but failing on the last step (at least as far as I understand the whole thing).
```
root@rockpi-4b:/home/rock/projects/tuya-cloudcutte…
-
I am Running Lightleak, trying to get a flash dump for my LSC Smart Power Plug 970761.1 (https://github.com/tuya-cloudcutter/tuya-cloudcutter/issues/607)
Possibly related to #15 .
The chip insi…
-
I have a Carro Ceiling Fan (https://carrousa.com/collections/smart-ceiling-fan/products/akron-52-inch-3-blade-smart-ceiling-fan-with-led-light-kit-remote-silver-red-wood) which is supposedly compatib…
-
as part of running the tuya-cloudcutter exploit, a deviceconfig file is created. this file has the below items extracted from the tuya device:
"uuid":
"auth_key":
"local_key":
"sec_key":
…
-
Device details are here: https://github.com/tuya-cloudcutter/tuya-cloudcutter/issues/233
Got a chance to work on this device again today, im using the Lightleak BK7231N Variant JTAG (XOR) profile …
-
I always bekome this error i tried evrithing
Starting flash new (no backup)!
Now is: Dienstag, 16. Mai 2023 10:36:26.
Flasher mode: BK7231N
Going to open port: COM6.
Serial port open!
Getting…
-
I see among the release binaries are some images that are apparently for use with the Tuya CloudCutter exploit, but after a bit of googling, I can't find any confident instructions how to make use of …
-
There appear to be 24 bytes from offset 0x1c through 0x33 (24 bytes) in the OTA RBL file where you can set custom version information. Currently on the BK7231 families that is currently being filled …