-
Test with Twincat2 failed, error message:Something failed: ClientError: connectToTarget(): Connecting to 127.0.0.1:48898 failed (socket error -4077)
-
We have lots of systems with TwinCAT2 and search solution for API requests. Any suggestion ?
-
Thanks for this s7 protocol, I use PROFINET to exchange data between S7 and twincat2.
S7 is maybe a better choice for non-realtime variables, is there any possibility to implement this into twincat 2…
-
Hello Sitebase,
I found your work, as I'm currently trying to find a way, how to control my Beckhoff CX9020 through MQTT, although I need to stay on TwinCat2 for my home automation.
I installed …
-
### What happened?
Run the read example for GO and changed to a single bool which i can read from other clients on the same computer.
Using an older PLC with Twincat 2 on port 801.
`readRequest, …
-
### What happened?
Hi all,
I upgraded from version 0.9.1 to 0.11.0 and I cannot write to my Beckhoff PLC anymore.
When I write 1 to a DINT, 16777216 is stored.
Is it a BIG-ENDIAN vs LITTLE-E…
-
PLC: 192.168.11.3
AMSnetID PLC: 5.50.37.33.1.1
Twincat 2
Raspberry Pi : 192.168.11.2
Route has been created on PLC. Settings should be according tot tutorials
Error : "Failed to connect 5.5…
-
The Config and Run button doesn`t work, will cause failure and pop up "DeviceInvalidState".
The Reset button works as expected.
Tested on CX2020 with Twincat2.
![failure](https://user-images.g…
-
This issue was reported by mail to me. It seems that it is possible to address array elements with `read_by_name` directly. I honestly didn' t know this works. Also I don't know if it makes sense beca…
-
Hi,
I want to communicate with the Beckhoff PLC, but i am facing an issue while reading multiple register using "read_list_by_name" pyads api.
Reference code :
```python
import pyads
import tim…