-
This is not a feature request, but I am curious what work would need to be done to add support for the Jetson TX2? I dug one out of storage recently and would love to run NixOS on it.
-
> I have test HFNet with TF-TRT on Tensorflow 1.x and Tensorflow 2
> When using TensorFlow 1.x, dynamics_op must set to true and it takes long time of initialization. When using Tensorf…
-
-
in my list of transaction i removed 1 out of …
-
in my list of transaction i removed 1 out of 2 transacti…
-
Hi!
First, thank you very much for this crate (IMHO it has the best API).
kanal bounded_async channels seems to work differently than tokio and go channels on select.
Suprisingly, when a branch o…
-
Hi,
I followed the steps which were al very clear. But I can't program the sensor. I keep getting `cannot get bus`.
`pi@raspberry:~ $ python3 hid_download_py/uartprogram OpenBK7231N_QIO_1.17.30…
-
Hello,
I have a problem with the connection to my Solax X3 Hybrid G4 inverter.
I am using a MAX485 adapter, the two DE/RE pins are connected to D5. DI to TX2 and RO to RX2.
The connector is plu…
-
**Describe the bug**
According to the VAICOM PRO user manual, the generic PTT mapping should follow this scheme:
TX1: VHF
TX2: UHF
But when loading into the DCS Viper, the PTT buttons are revers…
-
So I have been trying to run the tx1 version, using dab, on a tx2. I was able to compile/bitbake everything up until the last step (i.e. turn the board on with the SD card in). When I turn the board o…