-
On https://www.balena.io/os#download-os the NVIDIA Jetson TX2 is listed with BalenaOS version 5.3.3, but the TX2 NX is only on version 2.113.14.
Is there any major blocker for getting the TX2 NX …
-
Hello,
I have a yolov8 model that I converted to engine.
With the fp32 engine, the engine works good for inference and detect very well the object.
/usr/src/tensorrt/bin/trtexec \
--on…
-
http://huchaowei.com/2017/04/19/JetsonTX1-2configuration/
使用JetPack 2.3配置TX1 / 使用JetPack 3.0配置TX2
-
http://huchaowei.com/2017/04/19/JetsonTX1-2configuration/
使用JetPack 2.3配置TX1 / 使用JetPack 3.0配置TX2
-
Hello.
I am currently running Vimba Python on a Jetson TX2. I followed installation instructions, however when I run examples or custom code the same error periodically appears in the terminal:
``…
-
input connector 's resize is done only on CPU, and takes more time then inference on many GPU enabled platforms.
When available, cv::resize should be replaced by cv::cuda::resize of cv::gpu::resi…
-
**Describe the issue**
We get the error output attached when running the `flash_jetson_external_storage.sh` script against an Nvidia Jetson TX2 NX with an NVMe SSD attached via a carrier board. Befor…
-
Hello,
I have installed jetpack 3.3 on my jetson and also was able to install Tensorflow which directly available for Jetson TX2 on Nvidia website. But I am unable to install pytorch on the Jetson TX…
ghost updated
5 years ago
-
**Describe the bug**
A memcopy from CPU to GPU that apparently has to be done takes 1.44 seconds, where the total inference time for the computation is 1.60 seconds. This issue occurs on a Jetson TX2…
-
python3 detectnet.py --model=peoplenet pedestrians.mp4 pedestrians_peoplenet.mp4
[gstreamer] initialized gstreamer, version 1.14.5.0
[gstreamer] gstDecoder -- creating decoder for pedestrians.mp4
O…