-
Hi team
Lets try to run the PUMBAA on u-blox nina W10X and u-blox nina B30x ?
Thanks!
-
Sir,
I am planning doing a lot of blogs using the Wokwi with the U-BLOX NINA W106.
We are representative in Brazil.
NINA W106 is core ESP32, but we have our GPIO map...
Is that possible to add th…
-
Sir,
I want to port KBProIDE to u-blox nina w102, but i have to change the partitions config to runs in 2Mb Flash.
Can you instruct me where the csv file ?
If works, i will do good blogs :)
…
-
Reference Doc for HTTP AT commands for LARA R6001D
https://content.u-blox.com/sites/default/files/documents/LARA-R6-L6_ATCommands_UBX-21046719.pdf
Current AT commands were designed to run with the…
-
Based on https://forum.rakwireless.com/t/gps-accuracy-on-rak12500/12660/13
BeeGee's code is using `setMeasurementRate()`. I've also seen this elsewhere and i'm wondering what this exactly does. Esp…
-
The examples [ublox.ino](https://github.com/SlashDevin/NeoGPS/blob/master/examples/ublox/ublox.ino) and [PUBX.ino](https://github.com/SlashDevin/NeoGPS/blob/master/examples/PUBX/PUBX.ino) both fail to…
-
Hello:
First, thanks for an awesome project!
I was testing using the sparkfun breakout Zed F9P, and all was good and stable, but that is a prototype board....I wanted something more permanent. …
-
Hi There
I got success today to run Microsoft Microcode on NRF52833, using the Adafruit Bootloader :)
I have to edit the HEX code created my Microcode and convert it to uf2 using the uf2conv.py uti…
-
Hi Radek,
Thanks a lot for your initiative with Astroberry!
Sadly, - I have GPS u-blox 7 problem... Astroberry 2.01.
I checked other posts even saw your comment u-blox 7 works well most of the ti…
-
@christiankuttke we need a GPS module. Honestly speaking, I could imagine having something that integrates into the UC2-ESP Firmware (@KillerInk). If an auxiliary USB-GPS device is to be used, I'm hap…