-
Hi I really liked the project and i wonder if you can make a version of the same code that uses UART protocol to communicate with PN532 over groove port
Thanks
-
I have run into issues with generating .fst trace with cocotb and verilator. Note that the .vcd trace generates fine.
Environment:
* cocotb version 1.9.0
* macOS 14.5 Darwin Kernel Version 23.5.0…
-
I'm trying to hack your code here:
https://github.com/rosmo-robot/ESP32-robot-car-controller/blob/1d02bc3e439fc5d32e3405b6d0aea368ef44d8af/src/main.cpp#L19
To run I2C commander: https://github.co…
samuk updated
11 months ago
-
## Origin
libmctp hosted by the openbmc project at https://github.com/openbmc/libmctp
## Purpose
Implements a transport protocol, MCTP, which is useful for multiplexing and packetizing data a…
-
Hey I happen to have more specs for the TTL UART protocol for this device, but I'm currently trying to figure out how to tap into the unit (USB, internal pins? my strengths are software). Are you inte…
-
### What happened?
Onboard wifi settings aren't available on boot or after sudo apt upgrade. Bluetooth settings are visible in ui but can't turn on. In addition my usb keyboard adapter isn't recogn…
-
Hello!
We discussed an ability to monitor several battery banks via rs-232 in Seplos project but stucked so I decided to try another approach. I bought a device:
![telegram-cloud-photo-size-2-53…
-
It would be great if the waveform viewer could support standard protocol decoding (such as i2c, uart, etc.), or if a waveform decoding plug-in could be added.
For example, it can support the followin…
-
Hello @leodesigner. First of all, I'd like to thank you for your work on reverse engineering the communication protocol of PowMr 4500/6500 inverter.
Unfortunately, I'm facing some issues when commu…
-
### What happened?
My ZigBee network just stopped working. And I got this error message: `zh:ember:ezsp: Found no buffer in queue but ASH layer sent signal that one was available. `
_EDIT:_
I…