-
https://staging.a-cup-of.coffee/blog/awtrix3-ulanzi-home-assistant/
Review of the Ulanzi TC001 with Awtrix 3 firmware and its integration with Home Assistant.
-
# Bug report
## Describe the bug
Ive run v0.96 since release, but now for like a couple weeks, even tho it connects to wifi, it doesnt pull the correct time or reacts to api calls to its API…
-
First thanks for the amazing blueprint! I really really like the look and feel and am constantly informed.
Nevertheless, if I could wish for things, I would like to have the ability to add Vorwarnunge…
-
# Bug report
The device turns off the power.
## Describe the bug
Sometimes in the morning i see, that the device is powered off.
press the left and right button tuns it on. the device is conti…
-
# Bug report
## Describe the bug
Our Ulanzi clocks work reliably for around a week or so, then the screen goes blank. After this happens we can connect to the devices by connecting to their IP a…
-
# Bug report (?)
## Describe the bug
Hello,
The topic published under: awtrix_06cf08/notify does not display on the TC001 but
if published under: awtrix_06cf08/custom/test it's works well!
…
-
# Bug report
## Describe the bug
My Ulanzi with Awtrix works fine for a few hours with HA over Mqtt. After 3-6 hours the wlan disconnects and on the left side two pixels (one yellow and one red) s…
-
https://github.com/Blueforcer/awtrix-light is a light controller for rgb matrix Leds. The Ulanzi smart clock is very popular and can be flashed with this. A module for this could be nice as a feedback…
-
# Question
I call a service node in node red to add a Icon_screen:
```
{
"icon_name": "dishwasher",
"text": "{{payload}}",
"lifetime": "1",
"screen_time": "1",
"r":…
-
With the default easy_ulanzi.yaml I can't do OTA updates. They usually go through and the clock reboots but it doesn't actually change anything.
I have a fairly new Ulanzi smart clock (might be a n…
noiob updated
5 months ago