-
Hello, I have two Ultrasonic level sensor by Tuya, they are not in the supported list but would love to see this integrated with Home Assistant and will do whatever I need to help this. Can anyone hel…
-
### The issue
The ultrasonic module makes use of a critical section (between PORT_ENTER_CRITICAL and PORT_EXIT_CRITICAL). Within it, it uses active loops (that is, `while (gpio_get_level(dev->echo_pi…
-
I am experiencing an accuracy problem with all of the MegaTinyCore devices I have tested (ATtiny 402, 1614, 1616, 414, 32xx
). This appears to be a core issue, as the same sketch and hardware works p…
-
**Describe the bug**
When using an ultrasonic sensor, if the echo pin is set to output the sensor still works correctly although, it should be an input
**To Reproduce**
use the ultrasound sensor …
-
I was able to run the code successfully but I don't know how to play an ultrasonic sound. I need help.
-
**Device normal info**
- Brand: EPT Tech
- Model: Smart TLC2206
**Device info (please complete the following information, which can be found in [log](https://github.com/tuya/tuya-home-assistant/…
-
Some dependency seems to be missing.
I will try to compile locally without docker support. Maybe this gives me a hint which dependency is missing in tasmocompiler.
Compiling .pio/build/tasmota32-…
-
@UncleRus
### The issue
I am using ESP32S3, and kept getting when trying to get sonar readings. I have tried both SR04 and AJ-SR04M sonar boards and have similar results:
1. Sonar heads are se…
weiwi updated
2 months ago
-
the ultrasonic MB1043 works alone properly but when it's put in the px4flow chip it doesn't give ground distance
-
Ultrasonic block only reads the EV3 sensor and not the NXT. Have tried multiple NXT sensors, different bricks, cables, and ports with no success. Additionally, I would like to add support for 3rd part…