-
Hello,
By default, if you don't define NETWORK_CONTROLLER, library sets to ETHERNET_CONTROLLER_W5X00. So if you are using a different box such as Uno R4 etc, you need to download and modify config…
-
A Minotaur/Uno interface is being developed and the root node was successfully solved. We now need a way to support reoptimization e.g. when the variable bounds change. I think it can be done via the …
-
-
### Please describe your issue.
It happens after putting the device into dfu mode. Gives this error.
Processing arduino_uno (board: uno; platform: atmelavr; framework: arduino)
----------------…
-
I tried running the example code(sawtooth) wired the setup as below:
5620 - UNO
CLK - SCK (ICSP HEADER PIN)
DIN - MOSI (ICSP HEADER PIN)
SYNC - PIN 8 OF THE UNO (As per the line in the exam…
-
The level of support for the renesas_uno architecture is unclear.
* The `library.properties` does not currently declare support for the renesas_uno architecture.
* The [uno-r4-library-compatibilit…
-
we bought this item for our weather station project :
Bread Board
I2C display
10k Resistor
DHT111
BMP180
Rain Sensor
433MHz RF transmitter module
Buck converter
anemometer
…
-
Hello. You did a great job! But i have problem with Arduino Uno R3 with E220-900T22D. I wire like you pic, and run you code [01_setConfiguration](https://github.com/xreef/EByte_LoRa_E220_Series_Librar…
-
Looking at the [listing](https://docs.arduino.cc/libraries/psychichttp/) for this library, it appears that the Arduino Uno R4 WiFi is not supported?
Are there plans to support this board at all?
-
It would be awesome if Uno Platform was also supported