-
光猫侧已开启upnp,没有二级路由
Python 3.12.3
Natter 2.1.1
执行`sudo natter.py -v -m iptables -p 55555 -U `
```
2024-06-08 09:15:13 [I] Natter v2.1.1
2024-06-08 09:15:13 [D] fwd-iptables: Found iptables (1, 8, …
-
问题:log:miniupnpd[465]: private/reserved address x.x.x.x is not suitable for external IP
找到的原因和解决方案:
以下引用自恩山,新版miniupnpd(upnp后端)多了一个IPv4公网地址检测环节,需要WAN口地址为公网地址时,miniupnpd才会工作。 如果WAN不是公网地址,miniupnpd会…
-
currently yaacc is using the cling library, which was designed for implementing the UPnP stack in general. Cling isn't maintained any more and the libs are currently included in yaacc. Yaacc only need…
-
### Game or games this happens in
None
### What area of the game / PPSSPP
Attempting to enable UPnP under networking settings will give a "Unable to find UPnP device" error regardless if the router…
-
### The problem
While looking in home-assistant.log for error messages related to another issue I found that the Async UPNP advertisement service repeatedly erroring (approximately every 30 secs) upo…
-
## Expected Behavior
When UPnP rules have been created, performing an operation which causes firewall rules to reload, e.g. modifying an OMR-Bypass rule should preserve UPnP rules.
## Current Beha…
-
After upgrading to syncthing v1.27.2, there are numerous UPnP error messages.
For example,
[664CR] 2024/01/06 00:07:57 INFO: Couldn't add port mapping for 192.168.1.11 (external port 43417 -> in…
-
### Describe the feature/enhancement
Great project so far, I really really like it!
It would be great to have support for UPNP Streaming for end devices like digital radios. So that one can select…
-
# Feature Request
Add upnp support
## Feature Information:
Add upnp support so target's can request an external firewall open the required ports on instance launch.
This will be very helpful w…
djedu updated
2 months ago
-
### Feedback
Just a tip worth noting in the documentation;- that for the HA Reolink Integration discovery, some Reolink IP Cameras like the RLC-423, require their device Configuration from the Reolin…