-
I wrote a NUT driver for UPSPlus (EP-0136), and I would appreciate any feedback before I submit a PR to the NUT repo.
Make sure that you have NUT installed:
`$ sudo apt-get install nut`
**To bu…
-
Using this library via [nut_exporter](https://github.com/DRuggeri/nut_exporter), I was getting errors with my UPSs:
`ts=2024-03-28T15:25:22.903Z caller=nut_collector.go:131 level=error msg="Failure g…
-
I own a UPSPlus for a while now and face several issues with it. I really want to like the product, but the firmware behaves very strangely and a lot of functionality is not appropriately documented. …
-
Hello guys, I'm a noob with upsplus, but quite experienced with 18650 cells and projects.
I just got my Upsplus running with a Raspberry Pi, but somehow the battery reading is completely wrong,
I'…
-
Hello, thank you first and foremost for your excellent work! I have a UPS expansion board with a rated voltage of 3.7V, which allows for the parallel installation of two 18650 batteries, each with a c…
-
Can this project be adapted/reconfigured to use UPS HAT 52pi EP-0136
https://wiki.52pi.com/index.php/EP-0136
-
When installing software I am getting this error. I have reported it at ina219 library, yet they point back to the board itself.
https://github.com/chrisb2/pi_ina219/issues/32
pi@piraspberry:~/u…
-
I have been trying everything to get my RPi4B to communicate with the USP Plus but I continually get this error
```
pi@ImpactRemote:~/upsplus $ python3 OTA_firmware_upgrade.py
Traceback (most re…
-
Hello,
I have one upsplus and after following the setup manual and running the install script i got error 121
Any idea?
![8BE4F8F2-682F-4469-8527-950EB0E7A550](https://user-images.githubusercon…
-
Traceback (most recent call last):
File "/home/pi/bin/upsPlus.py", line 41, in
batt_power = ina_batt.power()
File "/home/pi/.local/lib/python3.9/site-packages/ina219.py", line 204, in powe…