-
Hi! Are there any available resources or information on how to get OTG working on the OnePlus 6T?
-
-
> ESP32-S2/S3 chips have built-in USB-OTG peripherals, which support USB host mode.
I specifically have a ESP32-S3-USB-OTG board that I would like to use as a USB host.
I think [`esp-rs/esp-idf-…
-
log如下
`One-KVM OTG is enabled.
One-KVM video device is set to /dev/video1.
USERNAME and PASSWORD environment variables is not set, using defalut(admin/admin).
Trying OTG Port...
rm: cannot r…
-
Hello,
while implementing [USB support for the H7R/S series within Embassy](https://github.com/embassy-rs/embassy/pull/3337) we have noticed that the CubeMX database is missing a definition for the `…
-
1. File [stm32u5a9xx.h](https://github.com/STMicroelectronics/STM32CubeU5/blob/main/Drivers/CMSIS/Device/ST/STM32U5xx/Include/stm32u5a9xx.h), line 27339:
`#define USB_OTG_GCCFG_FSVMINUS_Msk 0x1U USB…
-
### Checks
- [X] I agree to follow the MicroPython [Code of Conduct](https://github.com/micropython/micropython/blob/master/CODEOFCONDUCT.md) to ensure a safe and respectful space for everyone.
- [X…
-
As discovered in #4958, the test above fails on rpi like follows.
```
[init -> usb_drv -> usb_drv] usb 1-1.3: USB disconnect, device number 63
[init -> usb_hid_drv] usb usb-1-63: USB disconnect, …
-
I think i am missing something important, i did connect PS2 cable to pi pico, and used PS3 controller after changing host mode to DINPUT and then i used OTG cable, i also added power from another usb,…
-
## Environment
- **OS:** Windows 10 22H2
- **Scrcpy version:** 2.6.1
- **Installation method:** Windows release
- **Device model:** Galaxy J5 2017 J530FN
- **Android version:** 7
## Des…