-
Hello there, when trying to use a shared SPI bus, which is async, the `SdCard` cannot be instantiated, since the trait is not implemented. Is there a specific technical reason for this, or was this ju…
-
Procedure:
1) Insmod Kernel Module
`insmod esp32_spi.ko`
2) Wait for ESP Device handshaked success!
3) Remove Kernel Module
`rmmode esp32_spi.ko`
Device Driver hangup at step https://github.c…
-
Where can I find the the tool?
-
### Question
2 out of 10 power reset, i am getting this log message :-->
_rst:0x1 (POWERON),boot:0x0 (USB_BOOT)
wait usb download_
And on successful boot, i am getting :-->
_rst:0x1 (POWERON),b…
-
USB or I2C(SPI？)
-
### Category
Hardware Compatibility, Other
### Hardware
Linux Native
### Firmware Version
d73cbf14d5b0cf8a3f94d8028b9ab60d297fed96 (master) and older
### Description
When I use Me…
-
I'm trying to read from SPI via USB, but all I ever am returned is "FF" of the length of the request.
`81 92 00 92 00 31 00 00 6d 55 21 60 81 00 80 00 aa 97 77 18 18 81 00 90 10 26 80 00 00 0f ff f…
-
Hi everyone,
I have some frame missing on some very detail (full color) DMD
Exemple of table :
JP's Deadpool v5.1.2_VPX8
SpongeBob's Bikini Bottom Pinball VPW 2.1
they are full color and …
-
I just bought the OP5 Pro. I've just realized that there is no SPI flash fitted on the board. I simply want to boot from an external HDD. I've also seen the manual for booting from USB, but I believe …
-
I've got the following errors during compiling however my coding days are over and I'm a little rusty:
[ 93%] Building C object CMakeFiles/USB_to_RC.dir/home/flm/pico-sdk/src/rp2_common/hardware_exce…