-
I just don't know how to trouble-shoot this problem:
$ ./tmc
USBTMC debug: Using TermChar $VAR1 = '
';
USBTMC debug: enable auto detach of kernel driver.
USBTMC debug: Found USBTMC interface at…
-
If I boot the SKR Mini E3, it boots fine (1.2), but when I turn off the system and then plug in the Raspeberry Pi using Octoprint via USB, I get a TMC Connection error. Now the odd thing is that the X…
-
I've been using PlatformIO with `platform = espressif32@3.0.0` specified in the paltform.ini file. All built fine with this version. I want to upgrade to the newest platform version by using `platform…
-
While trying to port a project from LUFA to tinyUSB I can't seem to find a way to open several TMC ports on a single device. For example the [cdc_dual_ports](https://github.com/hathach/tinyusb/tree/ma…
-
Mapped plugin module "C:\Program Files (x86)\Thrustmaster\TARGET\Plugins\sys.dll"
StartCitizen 3.8.0 combined Throttle & Joystick
... log_level set to 1 (change it to 0 to stop logging)
Physica…
-
TMC2208 X connection... Error: All LOW
But same Stepper will work in Y,Z or E. So Stepper ok.
X will work with TMC2130 in SPI mode or TMC in Standalone mode. Think it may be the X-UART jumper pi…
-
I brought a new SKR2 rev B with 5x tmc2226.
I connected the board directly via USB and configured, installed new firmware, etc... After that, I replaced my old board with this SRK2 but the board refu…
-
I had problems getting TMC2209 step sticks working with UART configuratio in Marlin 2.x..
Some Bigtree TMC2208 before were working correctly, so I was debugging the case.
Problem is on these TMC22…
-
-
## Issue description
I have the fealing that the `generate-config.pl` script is pretty bugged, it keeps failing with `repeated question` and spews out tons of `Error in reading or end of file.` aft…