-
Can you add a flag USBasp?
-cusbasp
thanks..
-
I'd like to use a USBasp to program my Atmega chip, for which I am using the following configuration in my `platformio.ini` file:
```
[env:prod]
platform = atmelavr
board = atmega328pb
board_f_…
-
> AVRDUDESS-2.18-portable with USBasp (driver libusbK) and AVRDUDE v8.0 doesn't detect ATmega8. With AVRDUDE v7.0 - no problem.
_Originally posted by @forregister84 in https://github.com/ZakKemble/…
-
Hi, @vinodstanur ,
Sorry for bothering, however, I am trying to flash bootloader into arduino mega2560, and also it requires changing fuse bits.
And I was wondering if you could provide a link for w…
-
Doesn't recognize USBasp loaded with firmware version 1.09 from:
https://github.com/dioannidis/usbasp
D:\Avrdude>avrdude -q -q -C avrdude.conf -p atmega328p -c usbasp -e -U lock:w:0x3F:m -U efuse:…
-
Hi there.
I made a picoAVR and uploaded the pre-compiled firmware in the repository. A WINUSB device with product name picoAVR and a serial device did show up in the device manager. However, when I a…
-
The wiring on [this page](http://arduinodev.com/programming-guide-for-freematics-obd-ii-adapter-v2/) is incorrect. The ground wire should go to pins "1,3,5 or 7" instead of "pin 8". "Pin 8" is not co…
-
EDIT: **The original issue from google code has been solved. This issue is still open to keep track of uploading problems using USBAsp programmer, see comments below for details.**
This is [Issue 388…
-
I noticed that there is something wrong when using AVRDude 8.0. The app issues FAILURE in the log form. I debugged it and figure out that there is a case sensitive search for the string Version. Howev…
-
From here
http://szulat.blogspot.com/2012/08/atxmega-programmer-for-050.html
and here:
https://ketturi.kapsi.fi/2013/05/programming-xmega-with-usbasp-avrdude/
There are patched usbasp FW and pa…
mcuee updated
7 months ago